Send Inquiry

Request To Call Back

Centre Lathe Machine

Get a Price/Quote

MOQ : 1 Piece

Centre Lathe Machine Specification

Product Type
Centre Lathe Machine

Material
Cast Iron & Steel

Automatic Grade
Manual

Control System
Manual

Feature
Other

Color
Green

Surface Finish
Ground & Hardened ways

Taper of Spindle Bore
MT5

Carriage Travel
850 mm

Bed Length
1500 mm

Lead Screw Diameter
25 mm

Power Source
Electric

Spindle Bore
52 mm

Noise Level
<80 dB

Lubrication
Centralized

Distance Between Centres
1000 mm

Safety Features
Emergency stop, guards

Tailstock Quill Travel
125 mm

Chuck Type
3 Jaw & 4 Jaw

Centre Lathe Machine Trade Information

Minimum Order Quantity
1 Piece

Supply Ability
20 Pieces Per Month

Delivery Time
4-5 Days

Main Export Market(s)
Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa

About Centre Lathe Machine

centre lathe machine

All Geared Lathe Machine :

Technical Specification in mm

Perticular	250
Description
Height of Centre(mm)	250
Swing Over Bed (mm)	490
Swing Over Cross Slide (mm)	290
Distance Between Center (mm)	965mm
Max. Swing in Gap (mm)	770
BED
Bed Type	2 V & 2 Flat
Bed Width (mm)	325
Length of Gap in Front of Face Plate (mm)	240
HEAD STOCK
Number of Feeds	18
Spindel Speed Range : R.P.M.	32 TO 1650
Spindle Bore ( mm)	55
Spindle Taper Number	MT - 4
FEEDS AND THREADS
Number of Feeds	76
Range of longitudinal Feeds (mm/Rev)	0.026 to 0.936
Range of Cross Feeds (mm/rev)	0.016 to 0.62
Number of Threads	106
Range of Metric Threads/No.	0.2 to 7 mm (33)
Range of Inch Threads,No.	72 to 4 TPI (36)
Range of Module Threads/No.	0.3 to 3 Module (16)
Range of D.P. Threads/No.	44 to 8 D.P. (21)
Leed Screw Dia (mm)	38.1
Leed Screw Pitch (mm)	6 mm
SADDLE
Cross Slide Dimension (mm)	460 x 205
Cross Slide Travel (mm)	200
Compound Slide Traverse (mm)	150
TAIL STOCK
Spindle Dia (mm)	63.5
Spindle Taper Number	MT-4
Spindle Travel	175
Lateral Move to Tail Stock (mm)	5
MOTOR
Main MKotor (Kw.)	3

STANDARD ACCESSORIES

Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray.

EXTRA ACCESSORIES

Collet attachment
Machine Lamp
Quick change Tool Post
Collet ( 1 mm to 25 mm ) each collet cost
Chuck Flange 8"
Coolant Pump & Fitting
Collet ( 4 mm to 40 mm ) each collet cost
Chuck Flange 10"
Carrier Plate
Taper Turning Attachment
Face plate ( 350 mm Dia )
Extra Center Height 2"
Rear Tool Post
Follow Rest
Digital Read out System (DRO)
Mechanical Brake
Steady Rest

Note :

All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalog.

Heavy Duty Lathe Machine :

Technical Specification in mm

Parts	Specification	Heavy-1	Heavy-2	Heavy-3	Heavy-4	Heavy-5
Bed	Length of Bed Width of Bed Lenght of Gap in Front of Face Plate	5 6" (1708) 12.75" (323) 7" (178)	7 (2135) 12.75"(323) 7" (178)	9 (2745) 12.75"(323) 7" (178)	10 (3050) 12.75"(323) 7" (178)	12 (3650) 12.75" (323) 7" (178)
Capacity	Height of Centre Swing over Bed Admit between center Movement of cross slide Movement of comp. slide	10" (254) 19" (480mm) 20" (508) 7II (190mm) 6" (152mm)	10" (254) 19"(480mm) 38 " (965) 7II (190mm) 6" (152mm)	10" (254) 19" (480mm) 62 " (1575) 7II (190mm) 6" (152mm)	10" (254) 19" (480mm) 74 " (1880) 7II (190mm) 6" (152mm)	10" (254) 19"(480mm) 98 " (2490) 7II (190mm) 6" (152mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4
Tail Stock Spindle	Diameter Morse tapper Travel	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)
Speed	No. of speed RPM Low & High	8 25 to 450	8 25 to 450	8 25 to 450	8 25 to 450	8 25 to 450
Threads	Metric thread Inch thread Lead screw	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)
Electric	Motor Power	3 H.P III	3 H.P III	3 H.P III	3 H.P III	3 H.P III
Drive	Counter to spindle Counter to motor	C 72 x 2 no. B 72 x 2 no.	C 72 x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.
General	space (L x W x H)	81 x 45 x 50	99 x 45 x 50	122 x 45x50	134 x 45x 50	158 x 45 x 50

Technical Specification in mm

Parts	Specification	Medium 4 6"	Medium 5 3"	Medium 6
Bed	Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate	4 6" (1370mm) 11 " (280mm) 5" (127mm) 5" (127mm)	5 3 "(1600mm) 11 " (280mm) 5" (127mm) 5" (127mm)	6 (1830mm) 11 " (280mm) 5" (127mm) 5" (127mm)
Capacity	Height of Centre Admit between center Movement of cross slide Movement of comp. slide	8II (215mm) 20" (508mm) 6.75 (170mm) 5 " (127mm)	8II (215mm) 29" (740mm) 6.75 (170mm) 5 " (127mm)	8II (215mm) 38 " (965mm) 6.75 (170mm) 5 " (127mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	75mm x 6 TPI 2 1/8 " (55mm) MT - 4	75mm x 6 TPI 2 1/8 " (55mm) MT - 4	75mm x 6 TPI 2 1/8 " (55mm) MT - 4
Tail Stock Spindle	Diameter Morse tapper Travel	2" (50.8mm) MT - 4 6 (152mm)	2" (50.8mm) MT - 4 6 (152mm)	2" (50.8mm) MT - 4 6 (152mm)
Speed	No. of speed RPM Low & High	6 45 to 450	6 45 to 450	6 45 to 450
Threads	Metric thread Inch thread Lead screw	M 1 to 6 2 to 24 1I" (31.75mm)	M 1 to 6 2 to 24 1I" (31.75mm)	M 1 to 6 2 to 24 1I" (31.75mm)
Electric	Motor Power	2 H.P III	2 H.P III	2 H.P III
Drive	Counter to spindle Counter to motor	B - 48 x 2 no. B - 57 x 2 no.	B - 48 x 2 no. B - 57 x 2 no.	B - 48 x 2 no. B - 57 x 2 no.
General	Floor space (L x W x H)	65" x 39" x 55"	76" x 39" x 58"	84" x 39" x 55"

STANDARD ACCESSORIES

Chuck Plate, Face Plate, Change Gear Set, Steady Rest, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note:Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Meduim Duty Lathe Machine :

STANDARD ACCESSORIES

Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note :

Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Light Duty Lathe Machine :

Technical Specification in mm

Parts	Specification	Light 4II
Bed	Length of Bed Width of Bed Length of Gap	4II (1370mm) 9II" (242mm) 4" (100mm)
Capacity	Height of Centre Swing over Bed Admit between center Movement of cross slide Movement of comp. slide	6II" (165mm) 12II" (320mm) 26" (661mm) 5" (127mm) 3" (75mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	60mm x 8 TPI 1II (40mm) MT - 3
Tail Stock Spindle	Diameter Morse tapper Travel	1 5/8" (40mm) MT - 3 4 (100mm)
Speed	No. of speed RPM Low & High	8 40 to 950
Threads	Metric thread Inch thread Lead screw	M 1 to 6 2 to 24 1" (25.4mm)
Electric	Motor Power	1 H.P III
Drive	Counter to spindle Counter to motor	B -42 B -52
General	Floor space (L x W x H)	65" x 28" x 55"

STANDARD ACCESSORIES

Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note :

Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost. As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Precision Engineering and Robust Construction

This centre lathe combines precision engineering with robust materials, including cast iron and steel, for maximum durability and stability during operation. Its ground and hardened ways enhance surface finish and extend lifespan, ensuring dependable performance for high-volume, demanding machining requirements.

Versatile Machining Capability

The machine accommodates a variety of operations, thanks to its adjustable spindle bore (MT5 taper), wide carriage travel, and interchangeable chuck options. With its manual control system, operators can achieve both intricate and general-purpose jobs, making it versatile for workshops, manufacturing units, and educational institutions alike.

Enhanced Safety and User Comfort

Safety features such as an emergency stop and protective guards are integrated to ensure user well-being during operation. Centralized lubrication reduces maintenance time, while low noise levels (<80 dB) contribute to a comfortable working environment, promoting efficiency without compromising operator health.

FAQs of Centre Lathe Machine:

Q: How does the centralized lubrication system benefit the Centre Lathe Machines maintenance?

A: The centralized lubrication system ensures consistent delivery of lubrication to critical moving parts, reducing wear and extending machine life. This design minimizes downtime, facilitates easier maintenance routines, and enhances overall operational reliability.

Q: What is the process for changing between the 3-jaw and 4-jaw chuck on this lathe?

A: To switch chucks, first ensure the machine is powered down and safely locked out. Remove the existing chuck by loosening its mounting bolts, then align and secure the desired chuck, ensuring it is firmly attached before restarting the machine for operation.

Q: When is the optimal time to perform maintenance on the lathe machine?

A: Regular maintenance should be scheduled after a set number of operating hours or as recommended by the manufacturer. Additionally, periodic checks should occur before starting intensive tasks or following extended intervals of non-use.

Q: Where is this Centre Lathe Machine most commonly utilized in India?

A: This lathe is widely adopted in manufacturing workshops, repair facilities, technical institutes, and by distributors and suppliers. Its versatile specifications make it suitable for general machining, production, and educational applications throughout India.

Q: What safety features are included to protect operators during usage?

A: Safety features include an emergency stop button for rapid shutdown, sturdy guards for shielding from debris, and noise control measures. These elements work together to minimize accidents and maintain a safe work environment.

Q: How does using ground and hardened ways impact workpiece precision?

A: Ground and hardened ways offer superior resistance to wear and deformation, ensuring smooth carriage movement. This construction upholds tight tolerances, resulting in improved dimensional accuracy and high-quality surface finishes on workpieces.

Q: What are the main benefits of the manual control system for operators?

A: Manual control permits operators greater flexibility and direct engagement with machining tasks, allowing for rapid adjustments based on workpiece requirements. This fosters skill development, enhances precision, and supports detailed custom operations.

Tell us about your requirement