speed lathe machine
With the help of our adroit professionals, we are able to work as manufacturer, exporter, supplier and distributor of premium Heavy Duty Lathe Machine. This product is widely used for heavy duty solutions in surfacing, screw cutting operations and sliding. Our provided product is made up under the guidance of trained professionals using ultra modern technology and latest equipments. This machine is also quality checked by our quality controllers based on different set parameters. Our Heavy Duty Lathe Machine is hugely acclaimed amongst our customers for its:
Tecnical Specification (MM) | |||||||
Sr.No. | Parts | Specification | Heavy-1 | Heavy-2 | Heavy-3 | Heavy-4 | Heavy-5 |
1 | Bed | Length of Bed Width of Bed Lenght of Gap in Front of Face Plate |
5' 6" (1708) 12.75" (323) 7" (178) |
7' (2135) 12.75"(323) 7" (178) |
9' (2745) 12.75"(323) 7" (178) |
10' (3050) 12.75"(323) 7" (178) |
12' (3650) 12.75" (323) 7" (178) |
2 | Capacity | Height of Centre Swing over Bed Admit between center Movement of cross slide Movement of comp. slide |
10" (254) 19" (480mm) 20" (508) 7II (190mm) 6" (152mm) |
10" (254) 19"(480mm) 38 " (965) 7II (190mm) 6" (152mm) |
10" (254) 19" (480mm) 62 " (1575) 7II (190mm) 6" (152mm) |
10" (254) 19" (480mm) 74 " (1880) 7II (190mm) 6" (152mm) |
10" (254) 19"(480mm) 98 " (2490) 7II (190mm) 6" (152mm) |
3 | Main Spindle | Spindle Nose Spindle Bore Tapper Bore |
76 x 6 TPI 2.1/8 (54) MT - 4 |
76 x 6 TPI 2.1/8 (54) MT - 4 |
76 x 6 TPI 2.1/8 (54) MT - 4 |
76 x 6 TPI 2.1/8 (54) MT - 4 |
76 x 6 TPI 2.1/8 (54) MT - 4 |
4 | Tail Stock Spindle | Diameter Morse tapper Travel |
2.1/2" (63.5) MT - 4 7" (178mm) |
2.1/2" (63.5) MT - 4 7" (178mm) |
2.1/2" (63.5) MT - 4 7" (178mm) |
2.1/2" (63.5) MT - 4 7" (178mm) |
2.1/2" (63.5) MT - 4 7" (178mm) |
5 | Speed | No. of speed RPM Low & High |
8 25 to 450 |
8 25 to 450 |
8 25 to 450 |
8 25 to 450 |
8 25 to 450 |
6 | Threads | Metric thread Inch thread Lead screw |
1 to 6 2 to 24 1II" (38mm) |
1 to 6 2 to 24 1II" (38mm) |
1 to 6 2 to 24 1II" (38mm) |
1 to 6 2 to 24 1II" (38mm) |
1 to 6 2 to 24 1II" (38mm) |
7 | Electric | Motor Power | 3 H.P III | 3 H.P III | 3 H.P III | 3 H.P III | 3 H.P III |
8 | Drive | Counter to spindle Counter to motor |
C 72 x 2 no. B 72 x 2 no. |
C 72 x 2 no. B 72 x 2 no. |
C 72x 2 no. B 72 x 2 no. |
C 72x 2 no. B 72 x 2 no. |
C 72x 2 no. B 72 x 2 no. |
9 | General | space (L x W x H) | 81 x 45 x 50 | 99 x 45 x 50 | 122 x 45x50 | 134 x 45x 50 | 158 x 45 x 50 |
STANDARD ACCESSORIES
Chuck Plate, Face Plate, Change Gear Set, Steady Rest, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.
Note: Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost. As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.