Send Inquiry

Request To Call Back

new lathe machine

Get a Price/Quote

MOQ : 1 Piece

new lathe machine Specification

Product Type
Heavy Duty Lathe Machine

Material
Cast Iron, Alloy Steel

Automatic Grade
Semi-Automatic

Control System
Hand Lever, Feed Shaft

Feature
Other

Color
Machine Grey

Tool Post Type
Four Way

Chuck Size
200 mm

Spindle Speed Range
8 Steps (40-2000 RPM)

Gearbox Type
Norton Type

Distance between Centers
1200 mm

Lead Screw Diameter
30 mm

Cross Slide Travel
250 mm

Tailstock Quill Travel
150 mm

Motor Power
3 HP

Lubrication System
Centralized

Spindle Bore
52 mm

new lathe machine Trade Information

Minimum Order Quantity
1 Piece

Supply Ability
20 Pieces Per Month

Delivery Time
4-5 Days

Main Export Market(s)
Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa

Main Domestic Market
All India

About new lathe machine

New lathe machine

All Geared Lathe Machine :

Technical Specification in mm

Perticular	250
Description
Height of Centre(mm)	250
Swing Over Bed (mm)	490
Swing Over Cross Slide (mm)	290
Distance Between Center (mm)	965mm
Max. Swing in Gap (mm)	770
BED
Bed Type	2 V & 2 Flat
Bed Width (mm)	325
Length of Gap in Front of Face Plate (mm)	240
HEAD STOCK
Number of Feeds	18
Spindel Speed Range : R.P.M.	32 TO 1650
Spindle Bore ( mm)	55
Spindle Taper Number	MT - 4
FEEDS AND THREADS
Number of Feeds	76
Range of longitudinal Feeds (mm/Rev)	0.026 to 0.936
Range of Cross Feeds (mm/rev)	0.016 to 0.62
Number of Threads	106
Range of Metric Threads/No.	0.2 to 7 mm (33)
Range of Inch Threads,No.	72 to 4 TPI (36)
Range of Module Threads/No.	0.3 to 3 Module (16)
Range of D.P. Threads/No.	44 to 8 D.P. (21)
Leed Screw Dia (mm)	38.1
Leed Screw Pitch (mm)	6 mm
SADDLE
Cross Slide Dimension (mm)	460 x 205
Cross Slide Travel (mm)	200
Compound Slide Traverse (mm)	150

TAIL STOCK
Spindle Dia (mm)	63.5
Spindle Taper Number	MT-4
Spindle Travel	175
Lateral Move to Tail Stock (mm)	5
MOTOR
Main MKotor (Kw.)	3

STANDARD ACCESSORIES Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray

EXTRA ACCESSORIES

Collet attachment
Machine Lamp
Quick change Tool Post
Collet ( 1 mm to 25 mm ) each collet cost
Chuck Flange 8"
Coolant Pump & Fitting
Collet ( 4 mm to 40 mm ) each collet cost
Chuck Flange 10"
Carrier Plate
Taper Turning Attachment
Face plate ( 350 mm Dia )
Extra Center Height 2"
Rear Tool Post
Follow Rest
Digital Read out System (DRO)
Mechanical Brake
Steady Rest

Note :

All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.

The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalog.

Heavy Duty Lathe Machine :

Technical Specification in mm

Parts	Specification	Heavy-1	Heavy-2	Heavy-3	Heavy-4	Heavy-5
Bed	Length of Bed Width of Bed Lenght of Gap in Front of Face Plate	5 6" (1708) 12.75" (323) 7" (178)	7 (2135) 12.75"(323) 7" (178)	9 (2745) 12.75"(323) 7" (178)	10 (3050) 12.75"(323) 7" (178)	12 (3650) 12.75" (323) 7" (178)
Capacity	Height of Centre Swing over Bed Admit between center Movement of cross slide Movement of comp. slide	10" (254) 19" (480mm) 20" (508) 7II (190mm) 6" (152mm)	10" (254) 19"(480mm) 38 " (965) 7II (190mm) 6" (152mm)	10" (254) 19" (480mm) 62 " (1575) 7II (190mm) 6" (152mm)	10" (254) 19" (480mm) 74 " (1880) 7II (190mm) 6" (152mm)	10" (254) 19"(480mm) 98 " (2490) 7II (190mm) 6" (152mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4	76 x 6 TPI 2.1/8 (54) MT - 4
Tail Stock Spindle	Diameter Morse tapper Travel	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)	2.1/2" (63.5) MT - 4 7" (178mm)
Speed	No. of speed RPM Low & High	8 25 to 450	8 25 to 450	8 25 to 450	8 25 to 450	8 25 to 450
Threads	Metric thread Inch thread Lead screw	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)	1 to 6 2 to 24 1II" (38mm)
Electric	Motor Power	3 H.P III	3 H.P III	3 H.P III	3 H.P III	3 H.P III
Drive	Counter to spindle Counter to motor	C 72 x 2 no. B 72 x 2 no.	C 72 x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.	C 72x 2 no. B 72 x 2 no.
General	space (L x W x H)	81 x 45 x 50	99 x 45 x 50	122 x 45x50	134 x 45x 50	158 x 45 x 50

Technical Specification in mm

Parts	Specification	Medium 4 6"	Medium 5 3"	Medium 6
Bed	Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate	4 6" (1370mm) 11 " (280mm) 5" (127mm) 5" (127mm)	5 3 "(1600mm) 11 " (280mm) 5" (127mm) 5" (127mm)	6 (1830mm) 11 " (280mm) 5" (127mm) 5" (127mm)
Capacity	Height of Centre Admit between center Movement of cross slide Movement of comp. slide	8II (215mm) 20" (508mm) 6.75 (170mm) 5 " (127mm)	8II (215mm) 29" (740mm) 6.75 (170mm) 5 " (127mm)	8II (215mm) 38 " (965mm) 6.75 (170mm) 5 " (127mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	75mm x 6 TPI 2 1/8 " (55mm) MT - 4	75mm x 6 TPI 2 1/8 " (55mm) MT - 4	75mm x 6 TPI 2 1/8 " (55mm) MT - 4
Tail Stock Spindle	Diameter Morse tapper Travel	2" (50.8mm) MT - 4 6 (152mm)	2" (50.8mm) MT - 4 6 (152mm)	2" (50.8mm) MT - 4 6 (152mm)
Speed	No. of speed RPM Low & High	6 45 to 450	6 45 to 450	6 45 to 450
Threads	Metric thread Inch thread Lead screw	M 1 to 6 2 to 24 1I" (31.75mm)	M 1 to 6 2 to 24 1I" (31.75mm)	M 1 to 6 2 to 24 1I" (31.75mm)
Electric	Motor Power	2 H.P III	2 H.P III	2 H.P III
Drive	Counter to spindle Counter to motor	B - 48 x 2 no. B - 57 x 2 no.	B - 48 x 2 no. B - 57 x 2 no.	B - 48 x 2 no. B - 57 x 2 no.
General	Floor space (L x W x H)	65" x 39" x 55"	76" x 39" x 58"	84" x 39" x 55"

STANDARD ACCESSORIES

Chuck Plate, Face Plate, Change Gear Set, Steady Rest, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note:Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Meduim Duty Lathe Machine :

STANDARD ACCESSORIES Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note :

Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.
As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Light Duty Lathe Machine :

Technical Specification in mm

Parts	Specification	Light 4II
Bed	Length of Bed Width of Bed Length of Gap	4II (1370mm) 9II" (242mm) 4" (100mm)
Capacity	Height of Centre Swing over Bed Admit between center Movement of cross slide Movement of comp. slide	6II" (165mm) 12II" (320mm) 26" (661mm) 5" (127mm) 3" (75mm)
Main Spindle	Spindle Nose Spindle Bore Tapper Bore	60mm x 8 TPI 1II (40mm) MT - 3
Tail Stock Spindle	Diameter Morse tapper Travel	1 5/8" (40mm) MT - 3 4 (100mm)
Speed	No. of speed RPM Low & High	8 40 to 950
Threads	Metric thread Inch thread Lead screw	M 1 to 6 2 to 24 1" (25.4mm)
Electric	Motor Power	1 H.P III
Drive	Counter to spindle Counter to motor	B -42 B -52
General	Floor space (L x W x H)	65" x 28" x 55"

STANDARD ACCESSORIES Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note :

Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost. As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Engineered for Precision and Durability

Every component, from the hardened and ground bed to the cast iron construction, is crafted to deliver exceptional stability and precision. The low-vibration design ensures accuracy in machining, even at varying speeds and loads. Ideal for both robust industrial tasks and intricate engineering applications, the lathe guarantees enduring performance and minimal wear.

Operational Flexibility and Ease of Use

With an 8-step spindle speed range (402000 RPM), four-way tool post, and a manual control system utilizing hand levers and a feed shaft, operators benefit from immense adaptability and straightforward controls. Centralized lubrication and a Norton-type gearbox minimize maintenance efforts, allowing for efficient and reliable operation throughout long working hours in any workshop setting.

FAQs of new lathe machine:

Q: How do I operate the lathe machine for changing spindle speeds?

A: The lathe machine features an 8-step spindle speed range from 40 to 2000 RPM, which can be easily adjusted using the control levers. Reference the speed chart on the machine to select the appropriate speed for your material and operation. Always ensure the lathe is at a full stop before changing speeds to prevent gearbox damage.

Q: What materials and workpiece sizes can this lathe machine handle?

A: Thanks to its maximum swing diameter of 400 mm and a distance of 1200 mm between centers, the lathe is suitable for machining medium to large workpieces. It can effectively process materials like cast iron, alloy steel, and similar metals, with a cutting thickness of up to 25 mm and an engraving area of up to 500 mm in length.

Q: When should I perform maintenance on the centralized lubrication system?

A: Regularly check the centralized lubrication system before each shift to ensure all moving parts are properly lubricated. Its advisable to refill or inspect lubrication levels as per the manufacturers schedule or after prolonged machine operation to maintain precision and extend component life.

Q: Where is this lathe machine most commonly used?

A: This lathe is ideal for applications in workshops, manufacturing units, and maintenance departments across India, particularly where high precision and robust construction are crucial. Its design and capacity make it well-suited for general engineering and metalworking industries.

Q: What is the process for clamping workpieces on the four-way tool post?

A: The four-way tool post allows for quick and stable mounting of different tools. Position your selected cutting tool, tighten securely using the tool post handle, and align it to the desired orientation. This arrangement accelerates tool changes and enhances efficiency during complex turning operations.

Q: How does the machine provide high precision and low vibration?

A: The lathes cast iron and alloy steel construction, along with a hardened and ground bed, minimize unwanted vibrations during operation. These features, combined with the precise lead screw and stable gearbox, result in consistent, accurate machining.

Q: What are the main benefits of using this manual lathe machine?

A: Users benefit from its robust construction, high-precision capabilities, and simple manual controls. The semi-automatic operation streamlines repetitive tasks, while features like centralized lubrication and Norton-type gearbox improve reliability, prolong machine life, and ensure operator comfort.

Tell us about your requirement