Cookie Img
Back to top
   Call Me Free Offline Send SMS Send Inquiry
Home » Products » Lathe Machines » latest lathe machine

latest lathe machine

latest lathe machine
latest lathe machine
Product Code : latest lathe machine-latest lathe machine
Brand Name : Blue Tech
Product Description

latest lathe machine


 All Geared Lathe Machine :

Tecnical Specification (MM)
Perticular 250
Description
Height of Centre(mm) 250
Swing Over Bed (mm) 490
Swing Over Cross Slide (mm) 290
Distance Between Center (mm) 965mm
Max. Swing in Gap (mm) 770
BED  
Bed Type 2 V & 2 Flat
Bed Width (mm) 325
Length of Gap in Front of Face Plate (mm) 240
HEAD STOCK  
Number of Feeds 18
Spindel Speed Range : R.P.M. 32 TO 1650
Spindle Bore ( mm) 55
Spindle Taper Number MT - 4
FEEDS AND THREADS  
Number of Feeds 76
Range of longitudinal Feeds (mm/Rev) 0.026 to 0.936
Range of Cross Feeds (mm/rev) 0.016 to 0.62
Number of Threads 106
Range of Metric Threads/No. 0.2 to 7 mm (33)
Range of Inch Threads,No. 72 to 4 TPI (36)
Range of Module Threads/No. 0.3 to 3 Module (16)
Range of D.P. Threads/No. 44 to 8 D.P. (21)
Leed Screw Dia (mm) 38.1
Leed Screw Pitch (mm) 6 mm
SADDLE  
Cross Slide Dimension (mm) 460 x 205
Cross Slide Travel (mm) 200
Compound Slide Traverse (mm) 150
TAIL STOCK  
Spindle Dia (mm) 63.5
Spindle Taper Number MT-4
Spindle Travel 175
Lateral Move to Tail Stock (mm) 5
MOTOR  
Main MKotor (Kw.) 3

 STANDARD ACCESSORIES

Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray.

EXTRA ACCESSORIES

»
Collet attachment
»
Machine Lamp
»
Quick change Tool Post
»
Collet ( 1 mm to 25 mm ) each collet cost
»
Chuck Flange 8"
»
Coolant Pump & Fitting
»
Collet ( 4 mm to 40 mm ) each collet cost
»
Chuck Flange 10"
»
Carrier Plate
»
Taper Turning Attachment
»
Face plate ( 350 mm Dia )
»
Extra Center Height 2"
»
Rear Tool Post
»
Follow Rest
»
Digital Read out System (DRO)
»
Mechanical Brake
»
Steady Rest
Note :
(1) All The above specifications are approximate and subject to change without prior notice as improvements are made from time to time.
(2) The Description " standard accessories / features " confirms to its list not the photo of models shown in the catalog.

 Heavy Duty Lathe Machine :

Tecnical Specification (MM)
Sr.No. Parts Specification Heavy-1 Heavy-2 Heavy-3 Heavy-4 Heavy-5
1 Bed Length of Bed
Width of Bed
Lenght of Gap in Front of Face Plate
5' 6" (1708)
12.75" (323)
7" (178)
7' (2135)
12.75"(323)
7" (178)
9' (2745)
12.75"(323)
7" (178)
10' (3050)
12.75"(323)
7" (178)
12' (3650)
12.75" (323)
7" (178)
2 Capacity Height of Centre
Swing over Bed
Admit between center
Movement of cross slide
Movement of comp. slide
10" (254)
19" (480mm)
20" (508)
7II (190mm)
6" (152mm)
10" (254)
19"(480mm)
38 " (965)
7II (190mm)
6" (152mm)
10" (254)
19" (480mm)
62 " (1575)
7II (190mm)
6" (152mm)
10" (254)
19" (480mm)
74 " (1880)
7II (190mm)
6" (152mm)
10" (254)
19"(480mm)
98 " (2490)
7II (190mm)
6" (152mm)
3 Main Spindle Spindle Nose
Spindle Bore
Tapper Bore
76 x 6 TPI
2.1/8 (54)
MT - 4
76 x 6 TPI
2.1/8 (54)
MT - 4
76 x 6 TPI
2.1/8 (54)
MT - 4
76 x 6 TPI
2.1/8 (54)
MT - 4
76 x 6 TPI
2.1/8 (54)
MT - 4
4 Tail Stock Spindle Diameter
Morse tapper
Travel
2.1/2" (63.5)
MT - 4
7" (178mm)
2.1/2" (63.5)
MT - 4
7" (178mm)
2.1/2" (63.5)
MT - 4
7" (178mm)
2.1/2" (63.5)
MT - 4
7" (178mm)
2.1/2" (63.5)
MT - 4
7" (178mm)
5 Speed No. of speed
RPM Low & High
8
25 to 450
8
25 to 450
8
25 to 450
8
25 to 450
8
25 to 450
6 Threads Metric thread
Inch thread
Lead screw
1 to 6
2 to 24
1II" (38mm)
1 to 6
2 to 24
1II" (38mm)
1 to 6
2 to 24
1II" (38mm)
1 to 6
2 to 24
1II" (38mm)
1 to 6
2 to 24
1II" (38mm)
7 Electric Motor Power 3 H.P III 3 H.P III 3 H.P III 3 H.P III 3 H.P III
8 Drive Counter to spindle
Counter to motor
C 72 x 2 no.
B 72 x 2 no.
C 72 x 2 no.
B 72 x 2 no.
C 72x 2 no.
B 72 x 2 no.
C 72x 2 no.
B 72 x 2 no.
C 72x 2 no.
B 72 x 2 no.
9 General space (L x W x H) 81 x 45 x 50 99 x 45 x 50 122 x 45x50 134 x 45x 50 158 x 45 x 50

 STANDARD ACCESSORIES

Chuck Plate, Face Plate, Change Gear Set, Steady Rest, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note: Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Meduim Duty Lathe Machine :

Tecnical Specification (MM)
Sr. No. Parts Specification Medium 4' 6" Medium 5' 3" Medium 6
1 Bed Length of Bed
Width of Bed
Length of Gap
Length of Gap in Front of Face Plate
4' 6" (1370mm)
11 " (280mm)
5" (127mm)
5" (127mm)
5' 3 "(1600mm)
11 " (280mm)
5" (127mm)
5" (127mm)
6' (1830mm)
11 " (280mm)
5" (127mm)
5" (127mm)
2 Capacity Height of Centre
Admit between center
Movement of cross slide
Movement of comp. slide
8II (215mm)
20" (508mm)
6.75 (170mm)
5 " (127mm)
8II (215mm)
29" (740mm)
6.75 (170mm)
5 " (127mm)
8II (215mm)
38 " (965mm)
6.75 (170mm)
5 " (127mm)
3 Main Spindle Spindle Nose
Spindle Bore
Tapper Bore
75mm x 6 TPI
2 1/8 " (55mm)
MT - 4
75mm x 6 TPI
2 1/8 " (55mm)
MT - 4
75mm x 6 TPI
2 1/8 " (55mm)
MT - 4
4 Tail Stock Spindle Diameter
Morse tapper
Travel
2" (50.8mm)
MT - 4
6' (152mm)
2" (50.8mm)
MT - 4
6' (152mm)
2" (50.8mm)
MT - 4
6' (152mm)
5 Speed No. of speed
RPM Low & High
6
45 to 450
6
45 to 450
6
45 to 450
6 Threads Metric thread
Inch thread
Lead screw
M 1 to 6
2 to 24
1I" (31.75mm)
M 1 to 6
2 to 24
1I" (31.75mm)
M 1 to 6
2 to 24
1I" (31.75mm)
7 Electric Motor Power 2 H.P III 2 H.P III 2 H.P III
8 Drive Counter to spindle
Counter to motor
B - 48 x 2 no.
B - 57 x 2 no.
B - 48 x 2 no.
B - 57 x 2 no.
B - 48 x 2 no.
B - 57 x 2 no.
9 General Floor space (L x W x H) 65" x 39" x 55" 76" x 39" x 58" 84" x 39" x 55"

 STANDARD ACCESSORIES

Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note :

Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost.

As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.

Light Duty Lathe Machine :

Tecnical Specification (MM)
Sr. No. Parts Specification Light 4II
1 Bed Length of Bed
Width of Bed
Length of Gap
4II (1370mm)
9II" (242mm)
4" (100mm)
2 Capacity Height of Centre
Swing over Bed
Admit between center
Movement of cross slide
Movement of comp. slide
6II" (165mm)
12II" (320mm)
26" (661mm)
5" (127mm)
3" (75mm)
3 Main Spindle Spindle Nose
Spindle Bore
Tapper Bore
60mm x 8 TPI
1II (40mm)
MT - 3
4 Tail Stock Spindle Diameter
Morse tapper
Travel
1 5/8" (40mm)
MT - 3
4 (100mm)
5 Speed No. of speed
RPM Low & High
8
40 to 950
6 Threads Metric thread
Inch thread
Lead screw
M 1 to 6
2 to 24
1" (25.4mm)
7 Electric Motor Power 1 H.P III
8 Drive Counter to spindle
Counter to motor
B -42
B -52
9 General Floor space (L x W x H) 65" x 28" x 55"

 STANDARD ACCESSORIES

Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.

Note :

Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost. As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.


UMA ENTERPRISE

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Most Popular Products
Lathe Machine
Extra Heavy Duty Lathe Machine
Medium Duty Lathe Machine
Light Duty Lathe Machine